[Shannon]

I appreciate your help, but I am still a little confused. At the outlet I have 3 wires. One white on the silver side and a red and black on the copper side (red on top & black on the bottom). The copper side with the red and black wire is the one that the tab is now broken off.

At the switch, the white is capped and there are two black wires and a red wire. One black wire and the red wire go into the back of the switch (in holes) and the other black loops around a screw on the side. The black looped on the screw is next to the red in the whole and the black in the hole does not have anything on the screw.

Do I have something wired wrong? Again, I appreciate your help.