|
Quote:My main breaker panel is on the outside of the house, on the Dining Room wall- to acess the back of it to bring in the wire for the new ciricuits I would have to tear into 2 walls in several places. The house is also two stories which makes routing even more difficult (cant go into the attic and come back down for example).
The kitchen is next to the dining room, so I can add some conduit from the main panel and make a 4 foot run to an exterior portion of the kitchen wall and bring in the new circuits there. Since all of the drywall is out of the kitchen I have some freedom with routing the new circuits to the opening to the exterior wall to meet the conduit- so the J-Box would have to go on the outside of the kitchen wall. (not really ideal but I can't come up with anything better). I could post some pictures if that would be helpful.
If you have any suggestions I would greatly appreciate them,
Thanks again,
Nathan
>You say yu can't access the rear of your main panel to bring the >new cables into it. I guess I don't understand this fully. Where is >your main panel located?
|