|
I don't know why you would have to attach the metal lathe to the concrete?All you would need to do is to remover the paint and then isolate the cracks and then tile it.
This metal lathe does not need to be put on the floor,make sure the slab is clean and free of any oil,grease, dust, paint etc.If there ARE ANY SAW JOINTS OR CRACKS IN THE SLAB YOU WOULD NEED A MEMBRANE to isolate those cracks either an elastomereic one or paint on but you do not need the lathe.
What type of thinset were you going to use anyway?Not that it matters ,just wondering who would tell you that[8D]
Floorman
floorlayers union local 1310
|