[SSN596]

Dan: Your advice has been priceless! I checked one of the burners which still works and of course it turns about 30º and lifts right out!. There is a red gasket under, and that is why the one I need to get out is probably just
stuck. I will get it now.

I do know better than to short the model number. My apologies for that.

My plan is to order the part and the manual, just "because". The other 3 burners spark fine. Is it possible for something bad in the module to affect just one burner? The problem started after a spill and some cleaning. When I get the bad one out, it looks like I could swap the wires and confirm that way.

Again, thanks a million.