|
1. 3"
2. 3" I don't think would be out of line. So what if they'd stick out on the other side....as long as the wood doesn't split. Large heads won't matter as you'll be covering it with vinyl anyway.
2.5 the vinyl trim would be attached with 1" aluminum nails.
3. 2.5". I believe ringshank would be good for this and should be available for an airnailer.
4. Hammer stapler.
5. Not sure of the correct lengths, but there's a proper size for one layer or two layer roofing. Check at the box store for the correct size, unless somebody monitoring these posts knows for sure...
6. roofing nails would work for this. Hand applied...don't snug them down. Allow a nailhead thickness from the panel for movement of expansion/contraction...
|