[repairagain]

Ill check the blower housing again as well as jump the black part for there are only two wires. Thanks

quote:Originally posted by JCA1

Normally this is due to restricted air flow. Did you dissasemble the blower housing and check in there for blockage? I know you said you cleaned it but every time I've seen this problem a vent repair or cleaing solved it. There is a little black part mounted on the flame tube beside the burner. See if you can jump the wires there and try it. DO NOT leave it this way if it works. I'm not sure how many wires are there, I'm thinking just two, if more than two don't jump it.