[kyfullerton]

In my garage, I have a junction box in which the wires from the circuit are joined together with the three other wires (two lights and one outlet) with wire nuts. There is no light switch (the lights are dusk/dawn lights). I would like to install a single switch to control both lights. Can someone help me figure out (a) the best way to go about doing this and (b) which kind of switch to use? I have installed replacement switches and outlets and lights, etc., on many occasions, so I have some familiarity. But I'm having trouble with this one for some reason. Also, someone at Home Depot told me this was possible to accomplish with a single pole switch, but I'm not sure. Thanks for any advice you can give.