** 1. there is another problem with the oven **
Probably.
** 2. the element is not the correct rating **
I doubt it if you got the right one for that model. It should glow red when powered regardless.
** put my 110v/220v indicator over the bake element terminals and nothing. **
You are not getting power to the element. It won't heat without it.
** Looks like there might be a fuse that needs replacing as well. **
The only "fuse" would usually be in the house fuse panel. If that's not the problem, the element
may have '
taken out' some part of the control system when it failed. That happens occasionally
I'm afraid.
BTW. For us to find out which controls your appliance takes, you'll have to post its *complete*
model number (
SVD48600 is only part of it) and also its 'run' and/or serial number as written on
the appliance's model and serial number identification tag.
You can find tips for locating the identification tag on your appliances in the 'Repair Parts'
section of my web site linked below.
JFYI
Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~