Quote:
Originally Posted by HayZee518
that rejection metal clip is part of the breaker it cannot be removed. doing so will destroy the breaker. When you get a replacement breaker, GE, Crouse-Hinds, Challenger, Westinghouse, Arrow-Hart will all fit that Crouse Hinds panel, check to see if there is a hole going through the breaker handle. once you install the breaker in the panel, you can take a piece of #10 and pass it through the holes in the handles effectively tying them together. re-connect up your original wires. - one per breaker.
|
Ok, will do! I'm headed off to Home Depot right now so hopefully they'll have a replacement.
Then I'll have to get back up in the attic and try to avoid what I did which blew the breaker in the first place :-/
Thanks again!