|
Dear lonestarheir:
Two years ago I changed the original thermostat with a Honeywell. It had problems too so, last year I bought this Hunter.
Yesterday, while I was trying to find where the surface heat ignitor is located (still can find it and will have to find manual to see where it is - inside cover data is so small I'll need a magnifying glass to read it) I noticed the front cover was loose on the bottom when removing it. It took me a while to get it on correctly. That was at 1:30 P.M. So far it is working but as stated previously, I will have to wait at least 20 hours to see if it stops working again. I did place thermostat to manual settings on Saturday but it still shut down after 20 hours.
I will probably try another thermostat if the ignitor looks ok. I believe I have thermostat wired properly or it would not have worked for almost a year - wouldn't it?.
Thanks.
Pashue
|