02-12-2007, 07:09 PM
|
|
 |
Deity
|
|
Join Date: Jul 2004
Location: Saint Regis Falls, NY, USA.
Posts: 3,887
|
|
|
ok, the blue wire is for a lamp that mounts under the blades. I believe a molex connector plugs into this for a light. what you'll need topside is a 14 or 12/3 romex with ground cable. you'll run the three wire out of your switchbox to the ceiling box where the fan is mounted and connect up all the whites, black goes to the motor black and the red wire will go to the blue wire. all bare grounds go together and is grounded at the ceiling box and at the switch in the wall if you have a metal box. at the switch. hot black to fan hot and a pigtail out to the switch feed, whites together, load side off switch to the red wire.
|