|
water chatter...
Suspect this may be a bathroom sink issue. If so:
Most likely it's a loose or worn faucet washer. Turn the water off to both, hot and cold from under the sink. Turn the faucets on to relieve any residual pressure. Using a crescent wrench, loosen and remove the ~second~ nut under the hot water faucet handle. The first one is a packing nut. On the end of the stem you'll find a rubber type washer with a center screw. Remove screw and old washer. Replace new washer and old screw. Insert valve back in and tighten the nut and that should solve the problem.
|