|
Joe, I took a look at the plans and these with some modifications would be fine if you plan to build them in the same design as pictured.
The building inspector wants to know what the demensions of lumber you are planing to use on the building, such as, framed with 2X6 floor joists 16 inches on center, with plywood or board sheathing - 2X4 on walls 16 inches on center - Roof 2X8 roof rafters 16 on center.
Also they will want to know how you plan to support the building...
poured cement in sona tubes at corners or more...cement blocks just on top of soil...wood posts ?????
they will want to know all demnsions and products used for sheathings.
Take these plans in no mater how crude and the building inspector, if he will look over them and either OK them as drawn or make the changes that are required and give you your permit.
He then will come and inspect your project to see if it is built as drawn.
Gerry
|