[HayZee518]

it is easy to change the hot surface igniter. remove the grills in the oven part and remove the oven floor. it probably slides backwards then lift up in the front and it should come out. in the center will be a metal plate with one or two nuts on it. remove these nut(s) and the metal plate will lift out. the hot surface igniter is in back near the burner tube and thermocouple. one or two screws hold it in place. pull off the two slide connectors connected to the igniter. take it to a dealer and get an exact replacement. re-install it the same way you took it out. plug in the terminals and try the oven without replacing the plate and bottom floor. when you are sure it works ok, replace the metal plate and oven floor and grills.