Thanks for the diagram, easy enough.
Quote:
|
The bottom or load side of the meter, the cable(s) may be a thermoplastic jacketed cable or metal or pvc conduit. if cable then you'd use a non weathertight connector and also at the panelbox. if conduit then where it enters the building you'd use what is called an entrance ell. can be pvc or metal. if metal then it needs to have bonding bushings at the meter trough and panelbox.
|
Sorry, not quite following. Doesn't the meter and panel just have screw down clamps that take bare stripped wire like you mentioned in post #15? Every residential panel I have worked on has conduit housing the mains conductors which are just a normal rubber/plastic type insulation.