|
I stopped by their house and pulled the cover. His flashlight was dead and it was pretty dark but I am pretty sure they are AL mains and you're right, pretty short. Other circuits have a fair amount of wire. They used red for N in one of the circuits (is BX with just black and red wires). I can just use white electrical tape and wrape the end where it lands on the N and G buss, right, will that pass inspection?
Coming down from their meter is conduit with 3 conductors (2 legs and N). I assume they get earth ground through the conduit. A close by water pipe is bonded to the N/G buss via probably around 6AWG solid.
I think it should be pretty straight forward, what do you think?
|