|
Thank you, I understood everything but have one question.
I am pretty sure I know what you are saying but just want to be sure.
The driven ground rod uses a seperate conductor than the bonding bushings, right? That means the conduit from the meter to the breaker panel will have 2 bare 6AWG stranded conductors (one from the bonding bushings on both ends and one from the driven ground rod which will go to the neutral/ground strip then to the water meter).
or
Does the driven ground rod conductor connect to the bonding bushings as well so my whole ground/bonding conductor is 1 piece?
Finally, no bare ground needs to go in the conduit from the meter to the weathercap?
You recommend using PVC for the conduit?
Last edited by DKAudio; 05-26-2008 at 08:25 AM.
|