Quote:
Originally Posted by HayZee518
Ideally the water department is correct. If pressure at the main valve is the same as the mains pressure then the problem lies in your internal plumbing. from the main valve you should have 3/4 inch as a feed and where you tap off for fixtures you use a 3/4 x 1/2 x 3/4 T. Same for the hot water heater. Come off the tank with 3/4 and distribute with 1/2".
|
Thank you so much for your reply.
Are you saying that I should replace the pipes in my home? Is this the only option I have?