01-20-2009, 08:38 PM
|
|
 |
Deity
|
|
Join Date: Jul 2004
Location: Saint Regis Falls, NY, USA.
Posts: 4,979
Thanks: 0
Thanked 102 Times in 102 Posts
|
|
|
I would use a paste type paint and varnish remover. once the surface is down to bare wood I would use an alcohol wash on a rag to neutralize any effects of the remover. then I would sand the door, mouldings etc until a good, dry surface was there. I would use a good primer of zissner kilz as a bottom coat and finish with a good quality top coat.
|