|
as i said im only placing a pressure reducing valve in..nothing has broken and ive never had a pressure problem until check valve placed in line..the pressure will be 50 ,after the relief valve will be installed,and will keep it in check as far as pressure to(not from) heater.As to the temp/expansion in heater ive never had 1 drip in 5 yrs-till valve, i keep it low at 115 or less and if it goes too high and expands-the 125 psi inline release valve will relieve it to the drain(-This is NOT the one on water heater -155psi)..again no problems just info and opinions....
-the tank will protect nothing as to the incoming pressure/possible damage to the whole house-toilets ,icemaker, washers,etc..only heater.
Thanks!
|