|
Just an update on all this. I understood that my dishwasher has a sensor that supposedly monitors the water temperature and extends the wash cycle if the temp is too low (not sure how low that is). I checked the water temp and found it is just shy of 125 on my instant-read thermometer. So that didn't seem the likely problem. So once again I tried to run a load and I just let it go. It ran for slightly over 3 hours but the cycle did eventually stop on its own. I find this a VERY long cycle. But the system does at least terminate the cycle at some point. Not sure if this helps ID the culprit though. Thanks
|