|
Dan thanks again for the thought that you are putting into solving this oven issue. I will try to get someone to check the amperage, but I am rather curious as to when this amperage check is to made? Is the amperage test made after turning on the oven but just before the ignitor starts to glow?...or is it made while the ignitor is actually glowing red? or at some other point in the sequence?
Also, you say "the 'leak' would have to be in the gas system after the oven gas valve" but could another possible culprit be the "pressure regulator" which seems to be the very next part that is connected to the gas valve, i.e. let's say that the regulator does not allow the gas pressure to get high enough?
Thanks once again. - Steve
|