09-26-2004, 08:23 PM
|
|
 |
Deity
|
|
Join Date: Jul 2004
Location: Saint Regis Falls, NY, USA.
Posts: 3,896
|
|
|
Any coating you put on a surface depends on the condition of the surface. If it is not cleaned to the bare wood, is free of ALL moisture - NOTHING will stick to it! A quality latex or oil base paint will perform very well under most conditions. In my opinion ceramic is a type of porcelain finish and is applied using a two part epoxy vehicle. Acrylic is the same finish you have on your car. One coat may do it - Basically your car has 6 or seven coats of paint before the clear coat and final buffing. Go with the latex finish
|