Home Repair Forum



Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 02-26-2006, 06:33 PM
wak wak is offline
Handyman
 
Join Date: Feb 2006
Posts: 33
Thanks: 0
Thanked 0 Times in 0 Posts
wak is on a distinguished road
GE Refridgerator

I have a GE refridgerator, freezer compartment up top, model TBX 16SSXRAD, serial no. GM 795285.

The freezer compartment is freezing. The lower refridgerator compartment for cooling is not coolling. I see condensation on the top of the compartment which simply means there is a wide range temp differential. The light works, and the switch turns off the light when switch is on closed position.

I turned the temp sensor screw to off position and it shut off compressor.

What you guys think? Fan or temp sensor or something?

Thanks in advance.
Reply With Quote
  #2 (permalink)  
Old 02-26-2006, 07:46 PM
Handyman
 
Join Date: Jan 2006
Posts: 157
Thanks: 0
Thanked 0 Times in 0 Posts
Phelps is on a distinguished road
IS the fan going?

*HOW* cold is the freezer?

Can you feel any (cold) air blow through where it is supposed to blow through, at the top-back of the refrigerator? If not, you may have ice backed up and may need to thaw it out with a hair dryer. Maybe your defrost drain line is all filled with goo and it backed up and is not draining into the bottom pan, and has frozen up top. Clear out the drain line. If there is a rubber or plastic cup at the back where the drain line starts, you can pull these out and use a car vaccum tube (buy some at auto supply store) that fits the hole and blow through it and root around inside with like a pipe cleaner. You can also pull the refrigerator away from the wall, and get ahold of the drip pan end of the drain line and blow *UP* it, after you have hair dryered the ice away.
Reply With Quote
  #3 (permalink)  
Old 02-27-2006, 04:14 AM
wak wak is offline
Handyman
 
Join Date: Feb 2006
Posts: 33
Thanks: 0
Thanked 0 Times in 0 Posts
wak is on a distinguished road
I don't have a temp gage to check freezer compartment but everything is frozen hard. I do not feel a fan blowing in the lower compartment.
Reply With Quote
  #4 (permalink)  
Old 02-27-2006, 05:20 PM
Dan O.'s Avatar
Master Journeyman
 
Join Date: Sep 2003
Location: Canada.
Posts: 982
Thanks: 0
Thanked 1 Time in 1 Post
Dan O. is an unknown quantity at this point
Arrow Plugged drain?

Quote:
Originally Posted by wak
GE refrigerator TBX 16SSXRAD
The closest model number I found a listing for was TBX16SSXKRAD. Can you double check it?


Quote:
The lower [fridge] compartment is not cooling. I see condensation on the top of the compartment which simply means there is a wide range temp differential.
In some GE fridge models if the defrost water drain was plugged, water could pool in the bottom of the freezer compartment where it will eventually freeze. That ice could cause the ceiling of the fridge compartment to get colder than normal which might account for the condensation. The ice could also block air ducts into the fridge compartment resulting in the higher than normal temperatures you report having.

JFYI

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~
Reply With Quote
  #5 (permalink)  
Old 02-27-2006, 07:55 PM
wak wak is offline
Handyman
 
Join Date: Feb 2006
Posts: 33
Thanks: 0
Thanked 0 Times in 0 Posts
wak is on a distinguished road
double checked model number and it is TBX16SSXKRAD.

Im cleaning it out as we speak and going to defrost the entire unit.
Reply With Quote
  #6 (permalink)  
Old 02-27-2006, 10:18 PM
wak wak is offline
Handyman
 
Join Date: Feb 2006
Posts: 33
Thanks: 0
Thanked 0 Times in 0 Posts
wak is on a distinguished road
Ok we are making progress. I removed the back panel in the freeaer compartment on top. I plugged in the unit and the fan was not moving. I gave the fan blade a twirl and the fan started blowing. Looking at it, I then understood somewhat how these things worked. I then felt for air flow below with the shroud on and and did not feel air flow in lower compartment. I stuck my finger in the flow pipe between upper compartment and lower compartment and found it to be frozen. I will thaw this out right now with a hair dryer.

How am I doing so far?
Reply With Quote
  #7 (permalink)  
Old 02-28-2006, 12:06 AM
wak wak is offline
Handyman
 
Join Date: Feb 2006
Posts: 33
Thanks: 0
Thanked 0 Times in 0 Posts
wak is on a distinguished road
found problem!

Okay we found problem. I checked with my Fluke and have 120 vac to the fan, the fan won't run,hence need new evaporator fan.



I really appreciate the help . Thank you.
Reply With Quote
  #8 (permalink)  
Old 03-06-2006, 03:59 AM
wak wak is offline
Handyman
 
Join Date: Feb 2006
Posts: 33
Thanks: 0
Thanked 0 Times in 0 Posts
wak is on a distinguished road
I really messed up. I priced out the evap. fan, found a great deal replacement OEM model on Ebay and bought it. I removed the old fan from the housing and installed the new fan and tested it. The blade would not turn in which I pulled the blade away from the bushing and it worked fine.

It dawned on me this might be the problem with the old fan. So I tested the old fan without the blade and it ran fine.

I removed the new fan and installed the old fan. I adjusted the clearence and assembled the Refrig. all back together.

Runs well now. I'm going to put that new fan back and Ebay and try and sell it.

I't just ticked me off at myself that I should have checked the clearence first. The tale-tale sign was that I rotated the blade and did get it going when I originally diagnosed it.

I'm venting and typed this to discipline myself for being an idiot. Oh well...

Thanks again for the help.
Reply With Quote
  #9 (permalink)  
Old 03-06-2006, 01:55 PM
Dan O.'s Avatar
Master Journeyman
 
Join Date: Sep 2003
Location: Canada.
Posts: 982
Thanks: 0
Thanked 1 Time in 1 Post
Dan O. is an unknown quantity at this point
That is one of the problem with buying on eBay, usually no returns. I hope you can sell off the replacement without too much of a loss.

The online parts supplier at the following link will accept most electrical parts for return, even it they've been installed! Most other companies will not usually accepted such items back so you really need to be sure what you need before ordering.

LINK > "Return Any Part"

JFYI

Glad to hear you figured it out, thanks for the follow up.

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~
Reply With Quote
Reply

Bookmarks



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

» Stats
Members: 10,560
Threads: 6,931
Posts: 28,835
Top Poster: HayZee518 (4,023)
Welcome to our newest member, gt1639a
» Links

» Online Users: 48
2 members and 46 guests
Freddiy, gt1639a
Most users ever online was 388, 07-01-2007 at 02:54 AM.
Powered by vBadvanced CMPS v3.0.1

All times are GMT -5. The time now is 09:32 PM.


A vBSkinworks Design
Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.1.0