Whirlpool Dishwasher

[popgun2k]

Hi
I have a Whirlpool Dishwasher(under the counter).I went on a vacation and shut the water off to the dishwasher,just in case of hose break.When I returned home the other day,I turned the water back on and tried to run the dishwasher.It would not spray any water or no water would come thru the cycle.Too much of a coincidence,by just shutting the water off,as the dishwasher was working fine before I left.Any suggestions would be appreciated
tks

[Dan O.]

Whirlpool Dishwasher (under the counter)

I'm afraid that is not enough information to identify the appliance in question. What is needed is its exact model number.

It would not spray any water or no water would come thru the cycle.

If no water is entering the machine, no it won't have anything to spray.

Too much of a coincidence, by just shutting the water off

Just shutting off the water supply to the dishwasher should not usually cause any problems in a dishwasher. It has to be coincidence.

A start in trying to determine the cause will likely be to see if the dishwasher's water fill valve is getting power when it should be filling. You can read how the water valves on appliances function at the following link:

LINK > How do I test a water fill valve?

JFYI

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~

[popgun2k]

Hi Dan
Sorry for no info.Here it is.

It is a Whirpool Power Clean

Model#-WEU37001
Serial#-FD4611683

Hope this helps

Tks for reply

[Dan O.]

Whirpool [dishwasher] model WEU37001

That model is a Canadian Whirlpool product.

Hope this helps

At least I now know what machine design you're dealing with. Now some actual testing on the appliance will be required to try to isolate the possible cause.

You can see what the water fill valve on your model looks like at the following link. That is where testing will likely need to start.

LINK > Whirlpool WEU37001 Fill Valve

JMO

Dan O.
www.Appliance411.ca
The Appliance Information Site
=D~~~~~~