Maytag quiet series 100

[srfunk]

All the lights on our dishwasher are flashing and we can't get them to stop and it won't let us run it. Anyone have any ideas?

[Dan O.]

** Maytag quiet series 100 **

I'm afraid that is not enough information to identify the appliance in question. What is needed is its exact model number as requested be supplied in the first forum message.

LINK > Please include Make and Model # in post


** All the [indicator] lights are flashing and it won't let us run it. **

There might be a problem with the door switch(es). The only other thing I can think of is possibly a problem the electronic control... if used on whatever model of dishwasher you have. In the latter case you can try disconnecting power from the appliance for a minute or two to see if the control resets on its own.

JMO

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~

[srfunk]

Thanks Dan O. That's just what we did. We switched off the circuit breaker and once we turned it back on we were good. Some how, the lock setting had been activated....I have 3 little boys with very curious fingers....and when we were trying to figure out how to get it back to normal, the washer wigged out and started blinking all the lights. Now we know that if you hold the button down for 3 seconds, it turns off the lock setting and everything works again! Just a little aggrivating when you don't have your manual to tell you what's going on. Thank you for getting back to me so fast!

[Dan O.]

** We switched off the circuit breaker and once we turned it back on we were good. **

Glad to hear it.

** Just a little aggrivating when you don't have your manual **

LINK > Owner's Manual Resources

JFYI

Dan O.
www.Appliance411.com
The Appliance Information Site
=D~~~~~~