Home Repair Forum
Go Back   Home Repair Forum > Outdoor Home Repair > Decks and Fences
Register Chat FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09-19-2007, 02:06 PM
New Member
 
Join Date: Sep 2007
Posts: 3
legalprofessionals is on a distinguished road
Question peeling porch

hello everyone,

Our front porch floor is stained and then they put a layer of a clear gloss over it. That clear gloss layer is now peeling in certain areas and looks terrible. What is the best way to remove that layer of clear gloss. We will probably restain the porch as we do not like the color anyways. Can we just paint over the color or would we need to remove the stain first or prime?

Thanks
Reply With Quote
  #2 (permalink)  
Old 09-19-2007, 04:49 PM
HayZee518's Avatar
Deity
 
Join Date: Jul 2004
Location: Saint Regis Falls, NY, USA.
Posts: 3,346
HayZee518 is on a distinguished road
Send a message via AIM to HayZee518 Send a message via Yahoo to HayZee518
the stain I would bet was a solvent base. that is, mineral spirit base which has the pigment dissolved in it. the base or vehicletakes the stain and is absorbed by the porous wood, so it penetrates to a certain depth, then the vehicle or solvent evaporates leaving the stain. the clearcoat just sealed the surface. warming the clearcoat with an electric torch, you may be able to scrape it off. however I'm thinking the clearcoat may be a latex product. if water is left to sit on it - it may soften to which you can scrape it off. look on the web for a latex finish stripper.
Reply With Quote
  #3 (permalink)  
Old 09-20-2007, 02:09 PM
New Member
 
Join Date: Sep 2007
Posts: 3
legalprofessionals is on a distinguished road
what about power washing?

thanks for your reply - I will definetely try that. It is a clear top coat of some kind over the paint/stain. Would power washing the deck work at all to scrape off that top layer or would that just ruin it?
Reply With Quote
  #4 (permalink)  
Old 09-20-2007, 08:40 PM
HayZee518's Avatar
Deity
 
Join Date: Jul 2004
Location: Saint Regis Falls, NY, USA.
Posts: 3,346
HayZee518 is on a distinguished road
Send a message via AIM to HayZee518 Send a message via Yahoo to HayZee518
you could try but I can't guarantee results
Reply With Quote
  #5 (permalink)  
Old 09-21-2007, 02:16 PM
wvguy's Avatar
Painting, Decks and Fences Moderator
 
Join Date: Apr 2007
Location: West Virginia
Posts: 65
wvguy is on a distinguished road
Send a message via AIM to wvguy Send a message via Yahoo to wvguy
wow clear gloss

ok .. clear gloss topcoat. Not something i would advise since it can make your deck very slick with water. I am sure it would be a oil based product topcoat. Someone may have put say a interior/exterior varnish over the deck stain.
Two options. First you could sand, rent a floor sander and sand it all down. or use a stain stripper. Depending on how large the deck is would determine the method. The floor sander would be quicker on larger jobs but little more work.
After removing that top coat. and yes you will have to remove the top gloss coat or nothing will penetrate to the wood fibers.
See what it looks like after sanding or stripping then you can determine if you need a wood toner or a semi-transparent stain. Remember its always best to brush stain not spray.
Hope this helps.
Reply With Quote
  #6 (permalink)  
Old 11-20-2007, 12:47 AM
MichiganPowerWashing.com's Avatar
New Member
 
Join Date: Nov 2007
Posts: 6
MichiganPowerWashing.com is on a distinguished road
Hire power washing company. They will remove old stain and than you can do it with the deck/fence whatever you want.

I dont recommend to paint or stain over existing stain- especially when you don't know nothing about it. I'm almost possitive that you will have big problems with new stain sooner or later if you choose the easy way.
Reply With Quote
  #7 (permalink)  
Old 11-21-2007, 09:49 PM
New Member
 
Join Date: Nov 2007
Posts: 3
paintboy is on a distinguished road
Start over. There shouldn't have been a clear coat applied to an exterior surface, especially a wood deck. I'm not aware of any clear product recommended for a deck/porch. Even when exterior doors are stained and clear coated, when they are exposed to the sun and rain, they will degrade and need maintenance every 1-2 years. A deck/porch is an difficult surface to coat, it is exposed to the sun at an extreme angle and rain/snow also lays on the surface.

Once you remove the clear product and the stain, I would apply an acrylic deck stain product. I use Pittsburgh Paints Sunproof Deck and Siding Finish. If you use a semi-transparent product expect 1.5 - 2 years before re-applying. Solid color 3-5 years. Even though they are acrylic/water soluable products it does not mean they are inferior. There has been tremendous strides in the past 10 years to make these products superior to many alkyd/oil based products.

Visit a paint store and they will steer you in the right direction.

Good Luck

Last edited by paintboy : 11-23-2007 at 05:23 AM.
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

» Forum Navigation
     > Forum News
     > Illustrations
     > You Gotta Laugh!
     > Catch All
     > Plumbing
     > Electrical
     > Flooring
     > Wall Coverings
     > HVAC
     > Stenciling
     > Appliances
     > Audio & Video
     > Projects
     > Faux Painting
     > Painting
     > Gardening
     > Decks & Fences
     > Outdoor Projects
     > Garage Doors
» Links

» Search

Home Repair Forum
Google   
» Online Users: 33
0 members and 33 guests
No Members online
Most users ever online was 388, 07-01-2007 at 01:54 AM.
Powered by vBadvanced CMPS v2.2.0

All times are GMT -5. The time now is 10:58 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.1.0