 |
 |
|
 |

05-26-2005, 06:00 AM
|
|
|
 |
Handyman
|
|
Join Date: Mar 2005
Location: St-Lazare, Canada.
Posts: 33
|
|
|
dissimilar wires
Good morning,
Does anyone know if one is allowed, by code, to run dissimilar task wiring thru the same hole thru a joist? Here's an example, if I ran heating wiring and lighting wiring or if I ran the dryer wire and outlet wires thru the same 1" hole in the joist.
Thanks,
Craig
|

05-26-2005, 06:06 AM
|
|
|
 |
Deity
|
|
Join Date: Jul 2004
Location: Saint Regis Falls, NY, USA.
Posts: 3,837
|
|
|
There is no problem with doing that.
|

05-26-2005, 09:21 AM
|
|
|
 |
Master Journeyman
|
|
Join Date: Mar 2004
Location: .
Posts: 799
|
|
|
It's fine to run multiple AC cables through the same hole as long as there is plenty of room and the cables aren't getting squeezed at all. Otherwise drill another hole. You also need to limit the number of cables to 3, and if one cable is 8 gauge, then max should be that cable and one more 2 conductor cable.
But, you do not want to run a thermostat wire (heating wire) and AC cables together through the same holes. You need to keep low voltage wires and AC wires at least 2 feet apart to insure no interferance occurs. These types of wires can cross perpendicular to one another, but no close parrellel runs.
And if these 1 inch holes are in wall studs then you should install a nail plate over the edge of each one of these studs to prevent a drywall nail from penetrating the wires, it's safe insurance to protect your wiring.
|
 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Stats |
Members: 10,154
Threads: 6,798
Posts: 28,097
Top Poster: HayZee518 (3,837)
|
| Welcome to our newest member, The zzz Man |
» Links |
|
» Online Users: 22 |
| 0 members and 22 guests |
| No Members online |
| Most users ever online was 388, 07-01-2007 at 02:54 AM. |
|
All times are GMT -5. The time now is 04:56 AM.