Home Repair Forum



Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 08-17-2004, 01:42 AM
New Member
 
Join Date: Jul 2004
Location: .
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Scott Neumann is an unknown quantity at this point
Concrete driveway help

How long should I let my new concrete driveway dry out? I live in the Pacific NW, and it has been in the 70's to 90's since it has been laid. I have heard that a month is about standard. I have no coloring, stains or sealers on it, yet. Can I drive my car on it into the garage, which was not re-done? It will be 3 weeks on Friday since it was poured. Also, another ? is what is the best way to seal it after it is "cured" and finished drying out? Is it possible to put a stain on the new concrete before sealing? Also, if I apply stain and sealant, do I have to reapply on a yearly basis or ? Thanks for your help!
Reply With Quote
  #2 (permalink)  
Old 08-17-2004, 10:10 PM
King
 
Join Date: Jan 2004
Location: .
Posts: 1,012
Thanks: 1
Thanked 5 Times in 5 Posts
mrcaptainbob will become famous soon enough
Hope you were keeping it wet every day. The best is to lightly sprinkle it three times a day. Don't soak, just keep it 'damp'. The longer you keep it damp, the harder it will be. A week of that would be great. After the second week, I'd think it would be okay to drive on it.
Reply With Quote
  #3 (permalink)  
Old 08-18-2004, 12:17 AM
New Member
 
Join Date: Jul 2004
Location: .
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Scott Neumann is an unknown quantity at this point
Yes, I did keep it wet only the first week though. So you think I could drive on it after the third week? Also, any suggestions on putting stain and sealant on it? When will it be all dry? Can I tell? The driveway is partially in sun and partially in shade. The shaded areas look like they are still wet underneath, due to the darker area.
Reply With Quote
  #4 (permalink)  
Old 08-19-2004, 09:24 PM
LazyPup's Avatar
Deity
 
Join Date: Apr 2004
Location: Youngstown, Ohio USA.
Posts: 2,258
Thanks: 0
Thanked 14 Times in 14 Posts
LazyPup has a spectacular aura about
In the trade when they pour concrete they do a slump test to measure water content prior to the pour and often take a sample of each batch. The samples are allowed to harden 21 days before they do the compression tests. It was explained to me that concrete reaches 90% hardness in 21 days, then it takes over 100 years to reach the 100% hardness state.
Reply With Quote
  #5 (permalink)  
Old 01-13-2005, 10:02 PM
Handyman
 
Join Date: Jan 2005
Location: Fairport, New York, USA.
Posts: 56
Thanks: 0
Thanked 0 Times in 0 Posts
leone184 is an unknown quantity at this point
As far as staining your concrete, the only stains I know of for residential use also contain a sealer. Both Bruning and UGL make excellent concrete sealer/stains. Read the instructions carefully, they will tell you how long you have to wait for the concrete to cure, and if you need to etch the surface.
Be careful about using the driveway too much before you seal it, any stains or tire marks may not be completely covered.

leone184
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Stats
Members: 12,943
Threads: 7,776
Posts: 33,324
Top Poster: HayZee518 (4,977)
Welcome to our newest member, GLE3
» Online Users: 35
2 members and 33 guests
jnaas2, paul52446m
Most users ever online was 400, 06-22-2009 at 07:11 AM.
» Links

» Sponsors
Powered by vBadvanced CMPS v3.0.1

All times are GMT -5. The time now is 08:32 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.0