Well/Holding tank loosing pressure.

[Gary Slusser]

I've used every type of insert fittings there are for PE pipe. But I won't use galvanized. Nylon and sch 80 PVC are good for indoors, SS and brass for outdoors and under ground.

Use PE pipe to the hydrant.

The CPV that you are looking at (on the other site/forum) is a copy of the CVS and is not exact because that would infringe on the patents.

[DKAudio]

I used brass for the barbs, the only galvanized part in the system is the coupler that rests on the well seal. I am going to get everything at 1 site, Bob has been very helpful and I trust his products are good.