Search:

Those toe touch pop ups work similar to the clicker system on ballpoint pens but they get plugged up with soap scum and stuff, they need to be dismantled and cleaned out for the clicker system to...

Sounds more like the unit is undersized for the application, or your insulation and roof ventilation system is lacking and was not taken in to account when the unit was sized. Square footage and...

Your sprinkler system (fire suppression) is what is known as a dry system, normally there is no water in it just air pressure that is kept up to a certain pressure by the air compressor, the air...

Clean all connections to bright metal including the wires, clean thermocouple base in the gas valve and reseat it.

It would be still 60 watts as wattage is a power rating not light output, lumens is light output. you can increase the comparable lumens just do not exceed the the 60 watt maximum power rating.

RIGID makes an internal pipe wrench specifically to insert into the popup that grips internally and allows you to turn it while gripping the tailpiece, it has steps to accommodate different sizes,...

HF has a dashboard 12Volt solar charger for cars that works reasonably well to keep the battery topped off, would work for your case as long as the battery is charged it will keep it up, but dont...

Buy a HF sewer machine and clear it yourself, cheaper than hiring a plumber, and you have the tool for the next time it clogs,

Just replace the entire frost free hose bib, a reseating tool will cost you as much or more than the faucet, or just get a wood spade drill bit extension and attach the reseat tool to it.

Seems that is a heavy load for the one breaker, you need to separate the load to a different circuit, changing the breaker to a new one of the same amperage might help but the circuit is overloaded...

Some Moen cartridges can be installed 180 degrees out, maybe?

That sometimes happens when there is a clog in the drain, unscrew the pop up and remove any clog underneath it,

You are looking for a reason for increased water consumption but have found no evidence of leaks of losses after the meter, except for a pressure drop in the system when it is closed at the valves,...

Rent a sewer machine with a root cutter attachment and clean it out, then you can dump the root killer in annually to stop further growth, no it wont kill the tree.

Does Heating and Cooling in Toronto and Mississauga not have any work or customers that they have the time to waste posting SPAM on this site?.

I have a copy of the Repair manual if you need it, PM me with your EMail

Copper is a better quality system and changing to Pex is a downgrade, Pex fittings are even smaller bore than the Pex tubing itself, the only advantage of Pex is that nobody steals it to sell for...

The vent pressure switch could be the problem, the furnace needs combustion air make up but with the door closed it does not get enough flow to build enough pressure in the vent. It will cause the...

This might help explain the capacitors purpose and aid in the diagnosis https://en.wikipedia.org/wiki/Motor_capacitor

Creating a thermal barrier on a less than ideal depth water line using a foam closed cell insulation blue board placed above the water line to retard the frost penetration and form a thermal well can...

Depends on your location, codes and the frost line in winter, but it is not normally insulated.

4 inch leaves room for more capacity to be added and is the standard size used

The seal is usually attached to the stem, Google "frost free hydrant" and look in "images" not "web" plenty of exploded views

A hydrant with a vacuum breaker would prevent draw back in case of line pressure drop, as in many plumbing codes for municipal water systems, but not usually required in home owner well systems,...

I have repaired a few cracked and warped pots and rings, using TIG welding, very precise and accurate and the heat can be dialed down enough for the thin wall material, look for someone that can TIG...