Search:

Type: Posts; User: guitargirl; Keyword(s):

Search: Search took 0.01 seconds.

  1. I DID end up taking the chamber and heat...

    I DID end up taking the chamber and heat exchanger out, so I did use the rope gasket. The flue and exchanger were heavily caked with soot! The burn mat I installed had lifted also. So I took the...
  2. This is good to know! After my overhaul, Things...

    This is good to know! After my overhaul, Things look pretty good. I get some orange flame here and there, at changes in the cycle, but it doesn't last. And I have no sooting up! I go through about...
  3. I opened it up from the top and the burn mat was...

    I opened it up from the top and the burn mat was shot. Removed the crud, scraped clean with a small chisel and razor blade, vacuumed and wiped the pot. I tooth brushed the holes with alcohol. Since I...
  4. Monitor 441 - yellow flame...what should it look like?

    Hello again folks,

    Usually my husband takes care of our monitor, with the help of this forum. He rebuilt the burn pot about two years ago and replaced the burner mat. Last month, my husband passed...
  5. Thank you FordMan! I did buy the 9323K21 and now...

    Thank you FordMan! I did buy the 9323K21 and now I've got lots of gasket material, which makes me feel so much better. :-) I now have another issue, and I'll start a new thread about that...the...
  6. McMaster-Carr parts for Monitor 441 - burn mat and gaskets

    Hello,

    Regarding parts from McMaster-Carr for the Monitor 441 heater, I have ordered the items that HayZee518 posted to service my heater.

    Silica sheet goods 1/16" thick, size 40"X40" -...
  7. Thread: Thank you!

    by guitargirl
    Replies
    1
    Views
    1,115

    Thank you!

    Just want to extend thanks to all the experts on this forum, and thanks that the forum, with all it's old threads, exists. In the past, with your help, my husband (doing the work) and I (reading the...
  8. Thank you for this forum and for the generosity...

    Thank you for this forum and for the generosity of the readers. Wilmington Delaware, where we come from, isn't monitor country. This type of heater is all new to us. This forum has been a Godsend!...
  9. It had a bad bearing and sounded like a jet...

    It had a bad bearing and sounded like a jet engine. The fellow changed the bearing for us, showed us how the heater works and how to do basic servicing ourselves. He had the meter and showed us that...
  10. Thank you! The old solenoid is missing the...

    Thank you!



    The old solenoid is missing the o-ring, and while it was working, but was hanging up a little. We had to smack the fan housing to get it to move and shift the yellow flame to...
  11. Monitor 441 Solenoid Damper #6406 AC-120V vs DC-110V

    Hello,

    A service tech told us that our damper solenoid assembly was on the blink. I was able to get the service manual, thanks to this forum! With it, my husband and I have learned much about our...
  12. Replies
    67
    Views
    13,083

    another service manual request

    Hello, I'm hoping I'm not too late to receive an email of the service manual for the monitor 441. My email is guitargirl@gmail.com

    Thanks so very much!
Results 1 to 12 of 12