Search:

This is what I paid for OEM parts.

6119 plug packing $5.60
6754 Combustion ring $68.54
6130 chamber gasket $15.55
6358 rope gasket $15.17
6750 burner cloth $16.75 I received 2, one round...

a thermistor as used in the heater is a negative temperature device. as room temperature goes up, the resistivity of the device goes down and vice versa. I checked out a site and a 10K device seems...

They very seldom need replacing as they are not subjected to moisture. But if you have to it is not a big deal 20 min. max.

8813K11 is gasket material 1/8 thick 1 inch wide
8838K23 is burner mat material .040 thick 1 foot x 40 inches long - $11.40
9323K21 is more gasket material

I have looked backwards in several posts for parts from McMaster-Carr. Here's what I found:
8813K11, 8838K2, 9323K21, Rutland cement #77 and #641
Bearings for the combustion blower are an 8mm bore,...

Ford,

When you get the pot out, flip it over and remove the insulating pad. If the bottom has any warps or cracks it needs to be replaced. If not, just clean the carbon out and replace the...

I think ebay has pretty much exhausted their supply of monitor parts. Adirondack Hardware in Keeseville NY has all the parts you need. Monitor stopped making the vented kerosene heater earlier this...

Ford,

A Monitor 422 built in 1996 was one built in only the second year of that models run. You may have one of the early ones that had bushings instead on bearings in the combustion motor....

a complete overhaul is necessary. routine maintenance doesn't address all the issues. start with the combustion blower. if it sounds like a jet engine starting up [whining] bearings need to be...