Announcement

Collapse
No announcement yet.

Kitchenaid KUDS01FLss1 water pouring in from water inlet

Collapse

Forum Top GA Ad Widget

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kitchenaid KUDS01FLss1 water pouring in from water inlet

    Our Dishwasher is flooding our kitchen. The water from the water inlet valve does not stop letting water in. Had to turn the water off to stop the water from flowing. Any suggestions?

  • #2
    dishwasher

    two ideas come to mind. the timer is stuck at the inlet cycle. the valve is faulty.
    go to "repairclinic dot com" - find your model and find parts.

    Comment


    • #3
      Check while disconnected from power

      Originally posted by Walkers
      The water from the water inlet valve does not stop letting water in.
      If the dishwasher continues to fill with water even while unplugged from power, the water valve (see the following link) is stuck open and likely needs to be replaced.

      LINK > Kitchenaid KUDS01FLss1 Water Fill Valve

      If filling with water does stop when power is disconnected from the machine, some part(s) of the control system would need to be investigated. That however is unlikely as both the control and the float/overflow prevention switch would both need to be malfunctioning to result in overflowing.

      JMO


      Dan O.
      Appliance411.com
      The Appliance Information Site

      =D~~~~~~

      .
      Last edited by Dan O.; 02-27-2013, 12:47 PM.

      Comment

      Working...
      X
      =