Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Surround sound cooling fan....

  1. #1
    Join Date
    Jan 2004
    Location
    .
    Posts
    1,694
    Thanks {vb:rawphrase post_thanks_given 
    2
    Thanks Thanks Received 
    28
    Thanked in
    27 Posts

    Surround sound cooling fan....

    The buzzing from the surround sound unit turned out to be the cooling fan. It's a Runda model FD124010HB 12V 0.10A unit. It's size is about an inch and a half square., Checked E-Bay, but those are 50mm square. And some sound a bit 'phisshy'... Where's a more legitimate place to go for one of these fans?

  2. #2
    Join Date
    Jul 2004
    Location
    Saint Regis Falls, NY, USA.
    Posts
    8,736
    Thanks {vb:rawphrase post_thanks_given 
    1
    Thanks Thanks Received 
    483
    Thanked in
    469 Posts

    fan

    I usually go to
    allelectronics dot com out in california. shipping takes less than a week - no minimum.

  3. #3
    Join Date
    Jan 2004
    Location
    .
    Posts
    1,694
    Thanks {vb:rawphrase post_thanks_given 
    2
    Thanks Thanks Received 
    28
    Thanked in
    27 Posts

    Cooling fan....

    Thanks, HayZee!! I have a note to them requesting info. You are a wealth of help. Much appreciated.

  4. #4
    Join Date
    Jan 2004
    Location
    .
    Posts
    1,694
    Thanks {vb:rawphrase post_thanks_given 
    2
    Thanks Thanks Received 
    28
    Thanked in
    27 Posts
    No reply yet from this company....Will wait 'till Friday and look for another source.

  5. #5
    Join Date
    Jul 2004
    Location
    Saint Regis Falls, NY, USA.
    Posts
    8,736
    Thanks {vb:rawphrase post_thanks_given 
    1
    Thanks Thanks Received 
    483
    Thanked in
    469 Posts

    fan

    just look in the catalog. the sizes and voltages are right there.
    what info are you looking for on the fan(s)?

  6. #6
    Join Date
    Jan 2004
    Location
    .
    Posts
    1,694
    Thanks {vb:rawphrase post_thanks_given 
    2
    Thanks Thanks Received 
    28
    Thanked in
    27 Posts
    Here is what I sent Allcorp:

    ----------------------------------
    Hi. I could not find the cooling fan I need from your online catalog for my RCA surround sound unit.
    The fan specs are:
    Brand: (not important to me..) Runda
    DC 12V, 0.10A
    Model: FD124010HS
    40mm x 40mm x 11 or 12 mm.

    Do you anything like this?

    Thanks for any help.
    -----------------------------------
    Have yet to receive a reply.

  7. #7
    Join Date
    Jul 2004
    Location
    Saint Regis Falls, NY, USA.
    Posts
    8,736
    Thanks {vb:rawphrase post_thanks_given 
    1
    Thanks Thanks Received 
    483
    Thanked in
    469 Posts

    cooling fan(s)

    I just went to the all electronics site and located two fans, both priced the same, with the dimensions you require. Only difference between the two is the outward appearance of them.
    The first one cat# CF414, is a block of acryllic with the fan in the middle
    Delta Fonsan # DFB0412H. 40 x 40 x 20mm. 12Vdc 0.10A. 5" leads with 2-pin socket connector (0.1" ctrs). New fan prepped with double-sided sticky tape on one edge. UL, CSA, CE

    The other one is an open faced construction CF 435
    12Vdc @ 0.06A. 40 x 40 x 11mm. 3" leads with 2-conductor socket connector, 0.1" spacing. CE.
    Both cost $3.25 each.

  8. #8
    Join Date
    Jan 2004
    Location
    .
    Posts
    1,694
    Thanks {vb:rawphrase post_thanks_given 
    2
    Thanks Thanks Received 
    28
    Thanked in
    27 Posts
    Hmmm... I guess I better visit an eyeglass factory next! Thanks for seeing what I couldn't/didn't, HayZee. I did order it.

  9. #9
    Join Date
    Jan 2004
    Location
    .
    Posts
    1,694
    Thanks {vb:rawphrase post_thanks_given 
    2
    Thanks Thanks Received 
    28
    Thanked in
    27 Posts
    Glad I kept the old one. The new fan came today, but the pigtail was too short, and the two pin connector was just not quite right. Spliced the old wire to the new fan and we now have the surround sound back. My wife is happy. Consequently....so am I! Thanks for your help....

  10. #10
    Join Date
    Mar 2014
    Posts
    3
    Thanks {vb:rawphrase post_thanks_given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts
    Quote Originally Posted by mrcaptainbob View Post
    Glad I kept the old one. The new fan came today, but the pigtail was too short, and the two pin connector was just not quite right. Spliced the old wire to the new fan and we now have the surround sound back. My wife is happy. Consequently....so am I! Thanks for your help....
    Can I ask you how loud your fan is? I want to replace mine, there's nothing wrong with it per say. But I can hear around volume 10 and lower. It bugs me when there's little sound or during a type of broadcast like the news where there isn't much going on.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •