Results 1 to 5 of 5

Thread: 441 Combustion Fan Rebuild? Bearings?

  1. #1
    Join Date
    Sep 2014
    Location
    Gustavus Alaska
    Posts
    37
    Thanks {vb:rawphrase post_thanks_given 
    0
    Thanks Thanks Received 
    3
    Thanked in
    3 Posts

    441 Combustion Fan Rebuild? Bearings?

    I have a 441 I am about to take apart. High pitch from the combustion fan. Can the bearings on these be replaced? I tried searching but only came up with info in the 422s
    thanks!

  2. #2
    Join Date
    Mar 2010
    Location
    Bethel, Alaska
    Posts
    621
    Thanks {vb:rawphrase post_thanks_given 
    0
    Thanks Thanks Received 
    123
    Thanked in
    117 Posts
    Lots of info on the site. The thread titled "Monitor 441 Heater" post # 335 by Adnadeau has a great picture break down of the 441 motor and blower assy. Get good bearings if you overhaul the motor. Cheap ones off EBAY are not worth the effort, as you will be doing it again in a year or two. Left hand threads on the fan shaft.

  3. The Following User Says Thank You to hawkins111 For This Useful Post:

    wjcroft (06-09-2019)

  4. #3
    Join Date
    Sep 2014
    Location
    Gustavus Alaska
    Posts
    37
    Thanks {vb:rawphrase post_thanks_given 
    0
    Thanks Thanks Received 
    3
    Thanked in
    3 Posts

  5. #4
    Join Date
    Aug 2008
    Location
    Bridgton, ME
    Posts
    146
    Thanks {vb:rawphrase post_thanks_given 
    0
    Thanks Thanks Received 
    28
    Thanked in
    25 Posts
    Bearing assemblies have an ABEC rating. A rating of 1 is just average; 3 is better. Check out McMaster-Carr 6661K12 under Precision Ball Bearings.

  6. The Following User Says Thank You to adnadeau For This Useful Post:

    wjcroft (06-09-2019)

  7. #5
    Join Date
    Sep 2014
    Location
    Gustavus Alaska
    Posts
    37
    Thanks {vb:rawphrase post_thanks_given 
    0
    Thanks Thanks Received 
    3
    Thanked in
    3 Posts
    Those 6661K12 look really good.

    got 4 of the NSK coming. cant beat $5/ea delivered for a top shelf bearing.






    http://www.nsk.com/common/data/ctrgPdf/e126h.pdf
    Last edited by ctbale; 06-11-2019 at 09:55 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •