Results 1 to 2 of 2

Thread: Monitor 441 Heater temperature cuts back

  1. #1
    Join Date
    Oct 2012
    Posts
    1
    Thanks {vb:rawphrase post_thanks_given 
    0
    Thanks Thanks Received 
    0
    Thanked in
    0 Posts

    Monitor 441 Heater temperature cuts back

    The below incident has been three days in a row now.
    I had our Monitor 441 Heater set to 74 degrees. Out of no where the set temperature on Monitor dropped back to 70 degrees without us doing anything. I re-established the set temperature to 74 degrees. After approximately 5-7 minutes it did the.same thing.
    I powered off the Monitor, unplugged the unit for about 10 seconds. I then plugged up the Monitor, powered it back on and it works as normal.
    Could someone please offer any suggestions as to what could be causing this condition?

  2. #2
    Join Date
    Mar 2010
    Location
    Bethel, Alaska
    Posts
    625
    Thanks {vb:rawphrase post_thanks_given 
    0
    Thanks Thanks Received 
    123
    Thanked in
    117 Posts
    Loose wiring harness connection for indicator board or Reset Thermostat.
    Last edited by hawkins111; 11-11-2019 at 02:31 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •